GX250 GSM Mobile Gateway

ARTECH | B1club

Back to: Home > Product > Mobile Gateway>GX250

GSM Mobile Gateway GX250

AX520 has 2 line jacks and one phone jack. The line jacks can connect to PSTN line and VOIP line. Whenever there is a ring from either of them, the phone can ring and answer. When the user wants to make a phone call, it goes

Introduction

結合了傳統電話線路以及手機，利用固網的優惠案，二類電信的節費系統，以及行動電話業者網內戶打的優惠，達到最省錢通話費的效果。GX250裝置在電話外線及電話機(或總機)之間，透過內部的微電腦裝置，可以判斷出撥打電話號碼的最佳路徑，而選擇最適當的電話線路。舉例而言，如果有一家公司，申請了台灣固網，而且公司內部為了省錢，規定所有人員使用中華電信手機的門號。這樣一來，就可以將GX250設定成台固+中華手機。使用者完全不用考慮打的號碼要走哪一家公司的線路，只要照原來的方式撥號就可以了。

Features

Routing between PSTN and GSM
User can program the numbers he wishes to dial through GSM. Then the GX100/GX200 will choose the proper path (GSM or PSTN) to make the phone cal

ACR Dialer Inside
In addition to GSM/PSTN router, GX100/GX200 also has all features of super dialer. It can work as a ACR dialer, too.

Answering a GSM Phone Call by Normal Telepohone
When the handset receives a call, the normal telephone will ring. User can then pick up the handset and answer the call.

　

Call Diverter (follow me)
When the user is out of home or office, he can set the number where he is. If anybody call him from PSTN number, the unit will forward this call to the number through mobile phone. It also works in opposite direction.

Transit between PSTN and GSM Network
User can call in this device by PSTN, and then dial out from the GSM, or in opposite direction. Password can be set to protect unauthorized access

Use GSM as a PSTN Line
Under some conditions, the PSTN line is not available. User can still use normal telephone or PBX through GSM service.

Calling Time Limit
Can program the limit time for GSM outgoing calls.There are 2 modes, single call time limit and total calling time limit For example, user can set up max. call of each GSM call is 5 minutes or when the total call time come to 2,000 minutes, change the route to PSTN.

Mobile Coin Phone
Connect a normal coin phone to the GX100/GX200, it becomes a mobile coin phone. The system can be easily installed on trains, buses, or the places where the PSTN line is not available.

Easy Programming
More than 100 parameters provide most flexible setting. The PC-based programmer let dealers program the parameters easily. It can be programmed locally with PC or telephone set, or remotely through the PSTN line

Diagram

Home User
1.	Connect the AC/DC adaptor (DC18V/200mA).
2.	Connect a telephone line (or an analog PBX inter line) to LINE 1 of AX520, and another. line to LINE 2
3.	Connect the telephone set (or the CO line interface of a PBX) to PHONE jack of AX520.
4.	If there are more than 2 AX520 are applied, can easily stack up with the 4 feet. An optional 5-output plug AC/DC power adaptor is recommended.

Applications

For an ordinary family or a company, two numbers can share a fax, answering machine and wireless telephone, which can save expense a lot. For a fixed network, you can connect your Line to LINE1, the Zhonghua telecom Line of customers to LINE2. Then you can remain former Zhong
hua telecom number and not expand the number of an exchange board Lines.You can answer calls from any fixed network and dial numbers from LINE1. You can't dial numbers from LINE2 unless Zhonghua telecom service numbers. The latest network telephone has the function to make a call and faxing. So for the users who has installed VOIP, what is the best way to connect the former fax line and network fax line on the same fax? The product AX520 can help you complete the connection.

Technical Specifications

Input	1 RJ11 for line
Output	1 RJ11 for phone
Power Supply	DC18V 200mA adaptor
Dimension	105×71×30 mm
Weight	126g

Contents

GX250	1PC
Power Adaptor	1PC
Line Cord	2PCs
User's Manual	1PC

FAQ

1.	Does the product need electricity? If the power is off, what is the product like?

The product needs a DC18V Power Adaptor. If the power is off, the Line will be
Located at L2. You only can make and answer a call through L2.

2.	In case I am using the L1, what will happen when there is a call from L2?

If you are using either of two Lines, the other Line will be engaged automatically. That is to say, any calls will not be received from the L2.　

3.	Is it permitted if one Line comes from one extension line of a PBX and the other Line from PSTN?

This is allowable. Both the specifications of telephone line can be used.　

4.	Can the telephone numbers be used to dial out continuously if I press #0 to use L2?

It is allowable. You can continuously press #0 and destination number without waiting,which is available for redialing and memory dialing.　

5.	Is a Caller ID service available after installing the 2-Line Auto Switch.

At present, the Caller ID service in the Taiwan uses DTMF and sends signals before ringing. Normally the display shows a caller's information when a call from L1, not L2. But if the power is off, the switch will connect L2 automatically, the display l shows a caller's information when a call from L2, not L1. If the auto switch is used in USA or some areas where using FSK and sending signals after rings. The display will show caller's information from both Lines. (When power fails, only L2 does.)

Packing

Inner box	118×97×42mm
Carton size	505×225×260mm

2-Line Switch
Connect 2 CO line on a telephone device…

Qkids has a new look, new Search Bar, Smart Shuffle....…